2022 Dartmoor Reel Expert Boost Microspline, rear, 148x12mm, 108 engagement points, with Shimano Microspline freehub, 32H,

2022 DARTMOOR REEL EXPERT REAR
SHIMANO 12 SPEED MICRO-SPLINE
WEIGHT 298g
SIZES 148x12mm
ENGAGEMENT POINTS 108

Quantity: 1

DESCRIPTION

The ultra-light Reel Expert series rear hubs are the upgraded Reel Pro v.2 hubs that were available before. The Reel Expert hubs are equipped with a new wide pawls system with 108 engagement points and a reinforced structure to meet the requirements of modern drivetrains with cassettes generating very high loads when uphilling on a 51T or 52T cog. Each pawl has 2 teeth, catching the ratchet ring at the same time to increase the reliability of the pawls system. This super-strong system has already been used by us in the 2021 Dartmoor product range on Raven and Thunder straight-pull wheels.

There are four versions of Reel Expert rear hubs, three are equipped with aluminum 7075 internal axle and freehubs compatible with Shimano HG (a common type of freehub), Shimano Microspline, or SRAM XD standards. The fourth version is dedicated to e-bikes and is equipped with a Cr-Mo steel internal axle and a Cr-Mo steel Shimano HG freehub to withstand the loads generated by the drivetrains of gravity e-bikes. The Reel Expert rear hubs are equipped with highest quality sealed bearings with LLU full-contact seals branded with the Dartmoor logo and custom selected Mobil waterproof grease for the best mud and dust protection. There are 5 sealed bearings in the hubs with Shimano HG and SRAM XD freehubs and 6 sealed bearings in the hubs with Shimano Microspline freehub.

COMPATIBILTY: 

Between Reel Expert and Reel Pro v.2 series:
Free-hubs, pawls, and springs – not compatible
Internal axles and cones – compatible

SPECS

WEIGHT 298g

REAR HUB Yes

COLOURS Petrol; Black anod.

SIZES 148x12mm

HOLES 32H

BEARINGS precision sealed bearings with high-density grease and full contact LLU sealings

BEARINGS TYPE body: 2x6902; freehub Shimano HG: 2x15267 and 1x6902; freehub Shimano Microspline: 2x15267 and 2x6802; freehub SRAM XD: 3x15267

HUB-SHELL AL 6061-T6

AXLE 15mm, hard-anodized AL 7075-T6 or Cr-Mo steel

CONES AL 7075-T6, push-in (both sides)

FREE-HUB AL-7075: common Shimano HG, Shimano Microspline SRAM XD; Cr-Mo steel: common Shimano HG

PAWLS 6 pawls with 6 individual springs

ENGAGEMENT POINTS 108

0 stars based on 0 reviews